Philips Lumea Comfort SC1981/50 User Manual page 26

ENGLISH
26
- DO NOT raise the intensity level if you
experience abnormal discomfort during
or after treatment with Philips Lumea
Comfort (see chapter 'Risks of using
Philips Lumea Comfort').
- DO NOT raise the intensity level during
a hair removal session even if you
experience no discomfort. Discomfort
may also appear some time after the
session.
When you turn on Philips Lumea Comfort, its
intensity level is automatically reset to level 1.
At the start of each session, only one intensity light
is on: the intensity light for level 1. This means that,
at the start of each session, you have to increase the
intensity to the highest level that still felt comfortable
in the previous session.
Slide & Flash or Step & Flash
Slide & Flash
Keep the flash button pressed. The appliance
releases one flash after another as long as the skin
contact surface is in full contact with the skin.
After each flash, slide the appliance to the next area.
Continue to press the skin contact surface onto the
skin. This Slide & Flash mode is especially convenient
for treating larger areas like the legs.
Step & Flash
Let go of the flash button after each flash. For the
next flash, place the appliance on the area right next
to the area just treated. Make sure that the skin
contact surface is fully pressed onto the skin.
This Step & Flash mode guarantees a precise
treatment of e.g. the knees or ankles .