Philips Lumea Comfort SC1981/50 User Manual page 24

ENGLISH
24
Treating with Philips Lumea Comfort for
the first time
Use Philips Lumea Comfort only for its intended
purpose and as described in this user manual.
Make sure that your skin is shaved, clean, dry and
free of any powders, creams, antiperspirants or
deodorants.
1 Press the intensity button briefly. The green
intensity level 1 light turns on.
2 About 1 second later, the yellow READY light
turns on. The device is now ready to deliver a
first flash at the lowest intensity level.
3 If you wish to change the intensity level, press
the intensity button quickly and repeatedly to
increase the intensity level from 1 to 5 and
from 5 directly back to 1, until you reach the
desired level. The green level lights indicate
the level selected (see section 'Intensity level'
below).
4 Place the skin contact surface on the skin.
Make sure that the skin is spread evenly and
smoothly and the skin contact surface is in
full contact with the skin. Make sure that the
yellow READY light starts blinking slowly.
5 Press the flash button. The device first
determines the color of your skin. If the color
of the skin is light enough for safe treatment,
the device emits a flash of light and produces
a soft popping sound at the same time.
This popping sound is normal for this device.
You may also feel a mild warm and tingling
sensation.