Citizen CMP-40L User Manual page 53

Sub Menu
Network
Traffic
Security
WPS
Etc
alle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 30
Menu items
DHCP
IP Address
Subnet
Gateway
DNS
—
CA
Client
Key
WPS Type
Reboot
Firmware Update
V10 CONSUMIBLES S.L.
Options Description
ON You can set whether to enable
OFF or disable the DHCP function.
If DHCP is enabled, the IP
address of the specified SSID
Gateway will be applied.
Note: This settting can be set
when "Infrastructure" is selected
for Connection Type.
— You can set the IP address to be
applied.
Note: If you set Connection Type
to "SoftAP" or DHCP to ON, this
menu cannot be used.
— The subnet mask can be set.
Note: If you set Connection Type
to "SoftAP" or DHCP to ON, this
menu cannot be used.
— The IP address for an access
point can be set.
Note: If you set Connection Type
to "SoftAP" or DHCP to ON, this
menu cannot be used.
— If using a DNS server, enter the
address.
Note: If you set Connection Type
to "SoftAP" or "Adhoc" , or set
DHCP to ON, this menu cannot
be used.
— You can confirm the traffic
(transmitted and received data,
etc.) of each protocol (ETH ARP ,
IP , TCP and UDP).
— You can configure the settings
for a digital certificate. PEM
—
format files are only supported.
—
PBC You can set WPS.
Note: Note: This setting can be
set when "Infrastructure" is
selected for Connection Type.
— You can apply the setting to the
printer.
— The firmware can be updated.
53