Intended use Your BLACK+DECKER BEH200 Impact drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving purposes. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all instructions.
(Original instructions) ENGLISH 4. Power tool use and care b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and a. Do not force the power tool. Use the correct power refrigerators. tool for your application. The correct power tool will do There is an increased risk of electric shock if your body is the job better and safer at the rate for which it was earthed or grounded.
Children should be supervised to ensure that they do not If the supply cord is damaged, it must be replaced by the play with the appliance. manufacturer or an authorised BLACK+DECKER Service Centre in order to avoid a hazard. Residual risks.
The performance of your tool depends on the accessory used. hand while holding the rear part with the other. BLACK+DECKER accessories are engineered to high quality Insert the bit shaft into the chuck and firmly tighten standards and designed to enhance the performance of your the chuck.
(Original instructions) ENGLISH Australia & New Zealand Technical data t St S y e l & BEH200 www.blackanddecker.com.au Input voltage www.blackanddecker.co.nz Power input Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 0 ~ 2900 No load speed Max. drilling capacity Concrete Steel Wood...