Rule List; Ip&Mac Binding - TP-Link TL-WR945N User Manual

Chapter 4

4. 13. 2. Rule List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Bandwidth Control
rules.
• Description - This is the information about the rules such as address range.
• Egress Bandwidth
WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Enable - This field displays the status of the rule.
• Modify - Click Modify/Delete
¾ To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information as the figure shown below.
3. Click Save.
4. 14. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
> Rule List, and you can view and configure the Bandwidth Control
- This field displays the max and min upload bandwidth through the
- This field displays the max and min download bandwidth through
to edit/delete the rule.
51