TP-Link TL-WR945N User Manual page 25

450mbps wireless n router
Table of Contents

Advertisement

Chapter 4
Primary DNS/Secondary DNS
addresses to the router, please select
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select
User Name/Password
These fields are case-sensitive.
Auth Server
- Enter the authenticating server IP address or host name.
Auth Domain
- Type in the domain suffix server name based on your location.
MTU Size
- The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
Connection Mode
Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
Connect Automatically
when it is down.
- If your ISP does not automatically assign DNS
Use the following DNS servers
- Enter the user name and password provided by your ISP.
- In this mode, the Internet connection can be terminated
- The connection can be re-established automatically
and enter the IP
BigPond
Cable.
Max Idle Time
21

Advertisement

Table of Contents
loading

Table of Contents