Table of Contents
Advertisement
Chapter 2
2. 2. 2.
Access Point Mode
This mode transforms your existing wired network to a wireless network.
Internet
Ethernet1
Ethernet2
Ethernet3
Ethernet4
Ethernet1 Ethernet2
Ethernet3
Wired Host Router
1. Connect the power adapter to the router and turn on the router.
2. Connect the router to your wired host router's Ethernet port via an Ethernet cable as shown
above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(network name) and password printed on the Information Card.
4. Enter
http://tplinkwifi.net
then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to
Internet Options > Connections > LAN
OK to finish it.
5. After successfully login, go to
will reboot automatically.
6. Log in to the web management page again, and follow the
configuration.
Ethernet4
in the address bar of a web browser. Use
Settings, in the screen that appears, cancel the Using Proxy checkbox, and click
Working
Mode, choose
Access Point
Access Point
and click Save. The router
Quick Setup
Client
admin
for password, and
Tools menu >
to complete the
9
Advertisement
Table of Contents
