TP-Link TL-WR945N User Manual page 21

Chapter 4
3. A success message will appear on the WPS page if the client device has been successfully
added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
4. 3. Working Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Working Mode.
3. Select the working mode as needed and click Save.
4. 4. Network
4. 4. 1. WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Network > WAN.
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
Enabled and get the Current PIN of the router.
Dynamic IP, and the router will
17