Remote Controller Operation - Mitsubishi Electric PAC-IF012B Technical Manual

4. Remote controller operation

4.1 Parts name
■ Wired Remote-Controller
Display Section
For purposes of this
explanation, all parts of
the display are shown.
During actual operation,
only the relevant items
will be displayed.
Identifi es the current operation
Shows the operating mode,
etc.
* Multi language display is
supported.
"Centrally Controlled" indicator
Indicates that operation of
the remote controller has
been prohibited by a master
controller.
"Timer is Off" indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Operation Section
Set Temperature buttons
Down
Up
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Set Time buttons
Back
Ahead
Timer On/Off button
(Set Day button)
Opening the
lid
Note:
● "PLEASE WAIT" message
This message is displayed for approximately 3 minutes when power is supplied to the FTC unit or when the unit
is recovering from a power failure.
● "NOT AVAILABLE" message
This message is displayed if a button is pressed to operate a function that the FTC unit does not have, or a func-
tion that is not available due to the setting.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless
the simple or Auto Off timer is
set.
If the simple or Auto Off timer is
set, shows the time remaining.
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
˚F˚C
TEMP.
ON/OFF indicator
Indicates if timer is set ON/
OFF.
Hr ON
AFTER OFF
ERROR CODE
FUNCTION
˚F˚C
WEEKLY
ON/OFF
66
"Locked" indicator
Indicates that remote
controller buttons have been
locked.
Timer indicators
The indicator comes on if the
corresponding timer is set.
Error indicator
Comes on when error occurs.
Temperature indicator
Shows the current water
temperature.
(Power On indicator)
Indicates that the power is
on.
ON/OFF button
Setting change button
CIR. WATER button
(<Enter> button)
Not available
TEST run function is not
available with this FTC
unit.
Self check(Clear) button