Settings To Use The Printer; Problems When Making Settings - Epson EcoTank ET-3800 Series User Manual

Administrator Information
4. Select Dismiss to finish.
When you select Print Check Report, you can print the diagnosis result. Follow the on-screen instructions to
print it.
Related Information
"Changing the Network Connection from Wi-Fi to Ethernet" on page 187
&
Connecting to the Wireless LAN (Wi-Fi)
You can connect the printer to the wireless LAN (Wi-Fi) in several ways. Choose the connection method that
matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 189
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 190
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 192
&

Settings to Use the Printer

Problems when Making Settings

Hints to Solving Problems
❏ Checking the error message
When trouble has occurred, first check whether there are any messages on the printer's control panel or driver
screen. If you have the notification email set when the events occur, you can promptly learn the status.
❏ Network connection report
Diagnose the network and the printer status, and then print the result.
You can find the diagnosed error from the printer side.
❏ Checking the communication status
Check the communication status of server computer or client computer by using the command such as ping
and ipconfig.
❏ Connection test
For checking the connection between the printer to the mail server, perform the connection test from the
printer. Also, check the connection from the client computer to the server to check the communication status.
>
Settings to Use the Printer
242
>
Problems when Making Settings