Epson EcoTank ET-3800 Series User Manual page 191

Adding or Replacing the Computer or Devices
1. Select
on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
If the printer has already been connected by Ethernet, select Change to Wi-Fi connection., and then select Yes
after checking the message.
4. Select Push Button Setup (WPS).
5. Hold down the [WPS] button on the wireless router until the security light flashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
6. Press the OK button on the printer.
u d l r
buttons, and then press the OK button.
>
Re-setting the Network Connection
191
> ...
Making Wi-