Epson EcoTank ET-3800 Series User Manual page 189

Adding or Replacing the Computer or Devices
After connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 189
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 190
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 192
&
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Note:
If you are using a wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, see the documentation provided with the wireless router.
1. Select
on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3. Press the OK button to display the next screen.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
u d l r
buttons, and then press the OK button.
>
Re-setting the Network Connection
189
> ...
Making Wi-