Functions/Programmes Selected By Pressing The Function Buttons For; Seconds - Beko 60071474CHD1 User Manual

9.4.2 "Functions/Programmes Selected by
Pressing the Function Buttons for 3 Seconds"
• Drum Clean
• This is not a Laundry washing programme. It is a
maintenance programme.
• Do not run this programme when there are any objects in
CAUTION! the machine. If you try to do so, the machine detects that
there is a load inside and aborts the programme.
Press and hold the auxiliary function button 1 for 3 seconds to select the
programme. Use regularly (once in every 1-2 months) to clean the drum and
provide the required hygiene. Steam is applied before the programme to
soften the residues in the drum. Operate the programme while the machine is
completely empty. To obtain better results, put powder lime-scale remover for
washing machines into the detergent compartment no. "2". When the programme
is over, leave the loading door ajar so that the inside of the machine gets dry.
• Anti-Crease+
This function is selected by pressing the Quick Wash+ (Fast+) button for
3 seconds and after selecting, the related programme follow-up light will
become on. When the function is selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at the end of the programme. You
can cancel the programme and take your laundry out at any time during the
8-hour duration. Press the function selection key or the machine on/off
key to cancel the function. The programme follow-up light will remain on
until the function is canceled or the step is complete. If the function is not
cancelled, it will be active in the subsequent washing cycles as well.
• Auto Dose Setting
You can enable this function by pressing the auxiliary function key 3 for 3
seconds. With this function, the dosing amounts of the Liquid Detergent
and Softener are changed.
EN / 40
Washing Machine / User's Manual