Programming Cook Factor - Daewoo KOM-9F0CTX Operating Instructions Manual

Programming Cook Factor

To change cook factor for a preset pad.
1. Open the door.
• Display turns off.
2. Press and hold number 1 pad for a while.
• When the oven enters Programming mode, it will show
"PROGRAM" in the display.
3. Press number pads to be programmed.
• It will show a program number in the display.
• For single digit entry, press only one number pad.
• For multiple digit entry, press from one to three pads one by one.
4. Press X2 pad to change a cooking factor.
• It will show the current cook factor.
• Factory setting for cook factor is 80%. (CF:80 in the display)
5. Enter desired cook factor by using number pads. (0~9)
• Number 1 pad for 10% of cook factor through number 0 pad for
100% of cook factor.
6. Press START pad to save the cook factor changes.
• To discard changes, press STOP pad.
14