Download Print this page
Tradecraft Specialties SURFBUS-1 Instruction Manual

Tradecraft Specialties SURFBUS-1 Instruction Manual

Bed frame for twin mattress

Advertisement

Quick Links

Instruction Manual
Bed Frame For Twin Mattress
Model SURFBUS-1
Due to the presence of small parts during assembly, keep
out of reach of children until assembly is complete.
Model SURFBUS-1 Surfer Bus Bed Frame
Read all instructions before assembly and use.
Keep instructions for future use.
ADULT ASSEMBLY REQUIRED
Lancaster, PA 17601
tradecraftspecialties@gmail.com
www.tradecraftspecialties.com
Revised 10/18/2017
1900 Alfa Drive
(717) 269-8934
Page
1 of 6

Advertisement

loading

Summary of Contents for Tradecraft Specialties SURFBUS-1

  • Page 1 Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. 1900 Alfa Drive Lancaster, PA 17601 (717) 269-8934 tradecraftspecialties@gmail.com www.tradecraftspecialties.com Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 1 of 6...
  • Page 2: General Specifications

    ● Do not allow hanging, swinging, or leaning from or through any part of the bed or bed structure. General Specifications Assembled dimensions (approximate): 76" long, 39.5" wide, 36" high. Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 2 of 6...
  • Page 3: Care And Maintenance

    We use low-odor, zero VOC paint where possible and do our best to keep unpleasant odors to a minium. Disassembly To disassemble, reverse order of steps for assembly. Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 3 of 6...
  • Page 4: Parts List

    Parts List Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 4 of 6...
  • Page 5: Assembly Steps

    (1) screw at each end of support bar. Make sure support bar end is tight and perpendicular with side of bed. Start at rear of bed and work towards front. Leave 4.5” gaps between each support bar (approximately 7” center-to-center). Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 5 of 6...
  • Page 6 For exact fit and style, refer to picture on cover of manual. Step 4: Tighten all hardware. Make sure all assembled parts are tight and secure. Page Model SURFBUS-1 Surfer Bus Bed Frame Revised 10/18/2017 6 of 6...