Hyundai 2009 Santa Fe Owner's Manual page 47

1
FEATURES OF YOUR HYUNDAI
36
To install the child restraint seat
tether
Child Restraint
Hook Holder
Tether
anchor cover
1. Open the tether anchor cover.
Seaback behind the rear seat
OCM051006L
Front of Vehicle
2. Route the child restraint seat tether strap
over the seatback.
For vehicles with adjustable headrests,
route the tether strap under the head-
rest and between the headrest posts,
otherwise route the tether strap over the
top of the seatback.
3. Connect the tether strap hook to the
child restraint hook holder and tighten
to secure the seat.
Child
restraint
hook
holders
!
o Adjust the rear seatback in a semi-
reclined position from the upright po-
sition, before installing the Child Re-
straint Seat. With the seatback in the
proper reclining angle, push and pull
the child restraint seat in different
directions to be sure it is secure.
o A child can be seriously injured or
killed in a collision if the child restraint
is not properly anchored. Always
Tether strap
follow the child seat manufacturer's
hook
instructions for installation and use.
o Never mount more than one child re-
straint to a single tether or to a single
OCM052213L
lower anchorage point. The increased
load caused by multiple seats may
cause the tethers or anchorage points
to break, causing serious injury or
death.
WARNING: