Hyundai 2009 Santa Fe Owner's Manual page 41

1
FEATURES OF YOUR HYUNDAI
30
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts be
inspected periodically for wear or damage
of any kind. Parts of the system that are
damaged should be replaced as soon as
possible.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and dry. If
belts become dirty, they can be cleaned by
using a mild soap solution and warm wa-
ter. Bleach, dye, strong detergents or abra-
sives should not be used because they
may damage and weaken the fabric.
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or assem-
blies should be replaced if the vehicle has
been involved in an accident. This should
be done even if no damage is visible.
Additional questions concerning seat belt
operation should be directed to your
Hyundai Dealer.
B170A06A-AAT
Height Adjustable Front Seat
Shoulder Belt
You can adjust the height of the shoulder
belt anchor to one of the 4 positions for
maximum comfort and safety.
If the height of the adjusting seat belt is too
near your neck, you will not be getting the
most effective protection. The shoulder
portion should be adjusted so that it lies
across your chest and midway over your
shoulder nearest the door and not your
neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an
appropriate position. To raise the height
adjuster, pull it up. To lower it, push it down
while pressing the height adjuster button.
Release the button to lock the anchor into
position. Try sliding the height adjuster to
make sure that it has locked into the posi-
tion.
!
WARNING:
o Adjust the shoulder belt height when
you sit well back in the seat.
OCM052307
o When adjusting the shoulder belt
height, grip the height adjuster button
securely and slide the height adjuster
up or down.