Hyundai 2009 Santa Fe Owner's Manual page 184

B466B02CM-AAT
1. CD/RSE button (Switching to RSE
mode)
Switch between RSE mode and CD mode
by pressing the CD/RSE selector button
until you see RSE mode displayed in the
LCD screen. In RSE mode, you can control
the RSE system from the controls on the
front panel of the audio system.
NOTE:
o If you are in Radio mode, press the
CD/RSE selector button once to switch
to CD mode and then press the CD/
RSE selector button again to switch to
RSE mode.
o If the CD changer does not contain
any CDs, you must press the CD/RSE
selector button a second time within
5 seconds of the first. Otherwise, the
audio system will automatically switch
back to radio mode.
2. RSE Lock button
In any mode, press and hold the CD/RSE
selector button for more than 2 seconds to
lock or release the RSE from the LOCK
mode. The LCD screen displays LOCK to
indicate that the system is in LOCK mode.
When the LOCK mode is engaged, only
the POWER ON/OFF button and the EJECT
button on the RSE system will be func-
tional.
This function is useful if you do not want
rear-seat passengers (e.g. children) to play
with the controls or otherwise interrupt disc
playback.
FEATURES OF YOUR HYUNDAI
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
3. Track ' ' and ' ' buttons
If the RSE system is playing a disc and the
audio system is in RSE mode, press the
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
TRACK ' ' and ' ' buttons to select and
play the next or previous track on the disc
being played in the RSE.
The LCD screen displays the track status
as you press the buttons. You can press
the button several times to select the track
you want.
1
173
173 173 173 173 173