Connections And Buttons - Devolo 200 AV Wireless G User Manual

|
12
Initial use
2.2.2

Connections and buttons

The device can be wall-mounted.
|
devolo dLAN 200 AV Wireless G
The four LAN ports ETH1 through ETH4 allow you to connect PCs or other
network devices to the dLAN 200 AV Wireless G using commercially availa-
ble network cables.
The Reset button can perform a dual function:
If you keep the button pressed for longer than 10 seconds, the config-
uration of the device is reset to the factory default settings, i.e. all the
settings you have already configured will be lost.
If you keep this button pressed for less than 10 seconds, the device will
be restarted.
You can make your dLAN network more secure by simply pressing the
encryption button. For further details on encryption, please refer to the
chapter 4 on 'Establishing a connection to the dLAN network'.
Press the WLAN button to switch the WLAN function of your device on or
off.
The device is connected to the mains power supply via the power supply
jack.
|