Router Setup
configure the IP value for the IP, LAN & Wireless, and Internet. IP
is the address of the gateway device that allows for contact
between the Router and the remote network or host. LAN &
Wireless and Internet indicates whether the Destination IP is on
the local network (LAN & Wireless) or WAN (Internet).
To apply the changes, click Apply.
To cancel the latest changes without saving the changes, click Undo.
To delete a client, activate the appropriate checkbox in the Select column
and click Del.
VPN Passthrough
A Virtual Private Network (VPN) is a type of secured private network
connection, built upon publicly-accessible infrastructure such as the
Internet. They usually provide connectivity to various devices behind a
gateway or firewall.
IPSec Passthrough
IP Security (IPSec) provides authentication and encryption. Since it is
mainly a Layer 3 technology, it can secure all data on the network. To
allow IPSec tunnels to pass through the Router, click Enabled.
PPTP Passthrough
Point-to-Point Tunneling Protocol (PPTP) allows you to establish a
connection to an enterprise network. To allow PPTP tunnels to pass
through the Router, click Enabled.
L2TP Passthrough
Layer 2 Tunneling Protocol (L2TP) is an extension of the Point-to-Point
Tunneling Protocol and is also used to establish virtual private networks.
To allow L2TP tunnels to pass through the Router, click Enabled.
24