Table of Contents
Advertisement
Installation
be a user-friendly and simple process to get your Wi-Fi network up and
running.
1. Enable WiFi.
2. Press and hold the WPS button for at least 5 seconds. WPS
connecting is displayed.
3. Confirm the WPS option on the client PC trying to connect to the
device. New device connected is displayed. If you do not confirm
the WPS connection within 2 minutes, No Device found is
displayed and you must begin the process again.
When WPS is enabled, the screen automatically reverts to the Main
Screen after a period of inactivity when WPS is enabled.
Notifications
If the firmware version on the device is being updated via the Web
interface, the screen informs the user of the process.
If the user has enabled the PIN security protection on the SIM card, the
screen directs the user to access 4G LTE > PIN Verification via the web
12
FW updating...
PIN enabled
Act via Web
Advertisement
Table of Contents
