Figure 10. Installing The Computer In The Rack - Dell 4200 Rack Installation

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
2. Lift the computer system into position.
Place one hand on the front-bottom of the computer and the other hand on the
back-bottom of the computer.
3. Tilt the front of the computer upwards while aligning the back shoulder screws
on the sides of the computer with the back slots on the slide assemblies (see
Figure 10).

Figure 10. Installing the Computer in the Rack

4. Engage the back shoulder screws in the slot just behind the back (green) latch
first, followed by the middle shoulder screw in the slot near the middle (yellow)
latch. Finally, engage the front shoulder screw in the front slot.
5. Push the computer inward on the slide assemblies until the middle (yellow) latch
clicks into place, locking the slide to the middle shoulder screw (see Figure 10).
6. Press up on the green latches and push the chassis into the rack.
7 . Tighten the thumbscrews on each rack adapter bracket.
DELL CONFIDENTIAL - Preliminary
middle latch (yellow)
9/8/00
back latch
(green)
Rack Installation Guide 13