Safety Guidelines - Dell PowerVault 130T Safety Booklet

Tape library

Hide thumbs Also See for PowerVault 130T:

U02

Safety Guidelines

On-the-job safety is important; therefore, observe the following safety precautions during

all installation or maintenance activity. Failure to do so could result in injury.

•

Remove all conductive jewelry, such as watches and rings, before servicing powered-

on equipment.

•

In general power off the equipment being serviced before removing a field replaceable

unit (FRU) or other component. Remember that dangerous voltages could still be

present in some areas even though power is off.

•

Ground all test equipment and power tools.

•

Lift objects properly, as outlined under "Lifting Techniques."

•

Enforce good housekeeping practices in the equipment area to help prevent fire and

accidents.

U03

WARNING: Possible physical injury! HIGH VOLTAGE! DO NOT TOUCH any

components on the power supply located within the electronics module or on the

drive trays. Live voltage could be present even though the unit is powered off.

1-2

Safety Booket

Table of Contents