OPERATING PROCEDURE
13. Removing the power receiver
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the cover panel (front). (See Photo 1)
(4) Remove the cover panel (rear). (See Photo 1)
(5) Remove the electrical parts box. (See Photo 4)
(6) Remove the valve bed. (See Photo 11)
(7) Remove the side panel (R). (See Photo 1)
(8) Recover refrigerant.
(9) Remove 4 welded pipes of power receiver inlet and outlet.
(10) Remove the receiver leg fixing screws (2 for front, 4 × 10).
Note: Recover refrigerant without spreading it in the air.
OCH451D
Photo 11
Compressor
(MC)
145
PHOTOS
Receiver leg
fixing screws
Inlet
Outlet
Power
receiver
Receiver
leg