Introduction; Specification - Ultra Power UP200 Duo Instruction Manual

INTRODUCTION

Ultra Power UP200 DUO is a twin-channel charger with two independent
circuits, which can charge two different kinds of batteries simultaneously.
It can support power distribution in AC mode total power 100W
(CH1+CH2=100Watt.) and in DC mode, works in 2x100W, perform
terminal voltage setting, Battery Meter, PC control for firmware upgrade,
and also with Automatic Charging Current Limit, Capacity Limit,
Temperature Threshold and Processing Time Limit. Please read this
entire instuction manual completely and attentively before using this
product, as it covers a wide range of information on operation and safety.
UP200 Duo Specification
Input voltage
Charge Power
AC Input
Discharge power
Charge Current
Discharge Current
LiIo/LiPo/LiFe/LiHV cell count
NiCd/NiMH battery cell count
Pb battery voltage
Balance current
Weight
Dimension
Intelligent Power Distribution in AC Mode:
1. The output power base on the principle of CH1+CH2=100Watt.
Such as: 100W+0W, 80W+20W, 50W+50W, etc.
2. If only one channel is used, the output power comes from channel 1
can approach to Max. 100 watt, channel 2 can approach to Max. 50watt.
3. If both channels are used, the output power of channel 1 equals 100
watt minus output power of channel 2, (CH1 power=100Watt - CH2 power).
4. Start channel 2 while channel 1 is using fully 100Watt, the output
power of channel 1 will be reduced accordingly
AC 100-240V,
DC 11.0-18.0V
DC Input 2x100W
CH1+CH2=100W
(Support Power Distribution)
2x10W
0.1-10.0A
0.1-5.0A
1-6 series
1-15 cells
2V-20V (1-10cells)
500mA/cell
0.75KG
145x105x64mm
4