D-Link DES-6500 Command Line Interface Reference Manual page 46

show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-6500:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 11
DES-6500:4#
Used to display an SNMP view previously created on the switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view previously
created on the switch.
<view_name 32> − An alphanumeric string of up to 32 characters that
identifies the SNMP view that will be displayed.
Only administrator-level users can issue this command.
Subtree
-------------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1
1.3.6
1
1.3.6.1.6.3
1.3.6.1.6.3.1
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included