Md5 Configuration Commands - D-Link DES-6500 Command Line Interface Reference Manual

The MD5 configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
config md5
create md5
delete md5
show md5
Each command is listed, in detail, in the following sections.
config md5
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure an MD5 Key password:
DES-6500:4#config md5 key 1 dlink
Command: config md5 key 1 dlink
Success.
DES-6500:4#
create md5
Purpose
Syntax
DES-6500
MD5 C
Parameters
key <key_id 1-255>
<password 16>
key <key_id 1-255>
<password 16>
key <key_id 1-255>
key <key_id 1-255>
Used to enter configure the password for an MD5 key.
config md5 key <key_id> <password>
This command is used to configure an MD5 key and password.
key <key_id> − The MD5 key ID.
<password> − An MD5 password of up to 16 characters.
Only administrator-level users can issue this command.
Used to create a new entry in the MD5 key table.
create md5 key <key_id> <password>
ONFIGURATION
34
C
OMMANDS