Table of Contents
Advertisement
VGA IN/HDMI IN
image output is
not available
through USB
13
The output
image is not
clear with water
ripples
14
The data in the
USB flash drive
cannot be read.
Please refer to the
the applicable voltage frequency, and reset it according
to the instruction in
1. The USB flash drive with the capacity of 4 G and
above is recommended (up to 32 G supported)
2. Please make sure the file was saved at the specified
path: \DCIM\100MEDIA. (E.g.: J: \DCIM\100MEDIA)
3. Please make sure the file is named appropriately,
e.g. four English letters + four numbers. (E.g.:
LUMN0001.JPG)
Appendix 1
in the manual to confirm
Chapter 10 DIP Switch
Setting.
English-
42
Advertisement
Table of Contents
