Appendix A: Installing The Dcs-1100/1130 On A Router Without Upnp - D-Link DCS-1100 User Manual

D-link dcs-1100: user guide

Hide thumbs Also See for DCS-1100:

Table of Contents

Appendix A - Installing the DCS-1100/1130 on a Router Without UPnP

Appendix A: Installing the DCS-1100/1130 on a

If you connect your camera to an Internet router that does not support

UPnP, you can assign your camera to a DMZ connection on your router.

For more details, refer to your router's User Manual for more details on

configuring your camera to use a DMZ connection.

If you have multiple cameras you wish to connect, or if you do not want

to use DMZ, follow these steps to allow multiple remote access to your

cameras:

1) Identify your camera on the network

2) Assign a local IP address and port for your camera

3) Determine your router's WAN IP Address (Enable Remote

Viewing)

4) Open virtual server ports for your router (Enable Remote Viewing)

1) Identify Your Camera on the Network

• Log in to your camera's web interface from a computer on the same

local (home) network

• C l i c k o n t h e M A I N T E N A N C E t a b , a n d s e l e c t D e v i c e

Management

• Enter a unique Camera Name for your camera

Note: Giving your camera a unique name is important when setting

up multiple cameras on your network.

D-Link DCS-1100/1130 User Manual

Router Without UPnP

Table of Contents

Dcs-1130