D-Link DCS-1100 User Manual page 31

Section 4 - Configuration
Note: Video Profile 3 is always set to MJPEG as the Encode Type to
ensure that at least one of the Video Profiles are viewable by non-IE
browsers. Video Profile 4 is for mobile devices only, and always uses
MPEG-4 as the Encode Type.
Enable Night Mode: Check this box to enable Night Mode. Night mode
allows the camera to use a longer shutter speed when the camera is in a
low-light environment. If the camera is in an area where there is sufficient
lighting, Night Mode will not affect the video stream.
Shutter: This sets the longest shutter speed Night Mode will use when
Night Mode is enabled and the camera is viewing a low-light scene.
Light Source: Here you can set the kind of lighting used in the area your
camera is monitoring to improve the image quality of the video.
Enable Microphone: Checking this box will enable you to listen to audio
picked up by the camera's microphone. This will allow you to hear what
is happening near your camera.
Volume: This sets the volume level of the incoming audio.
Note: Higher frame size, frame rate and bit rates will give you better video
quality, but they will also require more network bandwidth. For best viewing
results on a mobile phone, we suggest setting the frame rate to 5 fps and
bit rate to 20 Kbps.
After making any changes, click the Save Settings button to save
your changes, or click the Don't Save Settings button to discard your
changes.
D-Link DCS-1100/1130 User Manual 26