D-Link DCS-1100 User Manual page 51

D-link dcs-1100: user guide

Hide thumbs Also See for DCS-1100:

Table of Contents

Appendix A - Installing the DCS-1100/1130 on a Router Without UPnP

Router Setup

The following steps generally apply to any router that you have on your network. The D-Link DIR-301 is used as an

example to clarify the configuration process.

Note: Because a dynamic WAN IP address can change from time to time depending on your ISP, you may want to

obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and

will be more convenient for you to use to access your camera from a remote location. You can also use DDNS to obtain

an IP address. Please refer to page 23 for more information.

D-Link DCS-1100/1130 User Manual

Table of Contents

Dcs-1130