Changing Or Updating Network Connections; Accessing The Web Config Utility - Epson WF-C4810 Series User Manual

Setting name
Secure
Connection
Certificate
Validation
POP3 Server
Address
POP3 Server Port
Number
Parent topic:

Changing or Updating Network Connections

See these sections to change or update how your product connects to a network.

Accessing the Web Config Utility

Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features
Parent topic:
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: You can also access the Web Config utility from the product information area in the Epson Smart
Panel app.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
Available options
None
STARTTLS
SSL/TLS
Enable
Disable
—
—
Configuring Email Server Settings
Wi-Fi or Wired Networking
Description
Selects the encryption protocol used by the email server.
Used with the SMTP AUTH or Off authentication methods.
Determines whether the CA Certificate is validated. You
must import a CA certificate to use this setting.
Lets you enter the address of the POP3 server using IPv4
or FQDN format.
Lets you enter the port number of the POP3 server. The
default port is 25.
74