Setting Up A Wsd Port (Windows 7/Windows Vista) - Epson WF-C4810 Series User Manual

• Save as JPEG to save the scanned image as a JPEG file.
• Save as PDF to save the scanned document or image as a PDF file.
6. Change any of the displayed settings as necessary.
7. Select Save.
Your product scans the original and sends the file to the connected computer.
Parent topic:
Related references
Control Panel Scanning Options
Related topics
Placing Originals on the Product

Setting Up a WSD Port (Windows 7/Windows Vista)

You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on
Windows 10 and Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1. Turn on your product.
2. Print a network status sheet so you can identify the network name and model name for your product
on the network.
3. Click or Start and select Computer.
4. On the left side of the window, select Network.
5. Locate your product on the Network screen, right-click it, and select Install.
6. When you see the User Account Control screen, click Continue.
Note: If you see an Uninstall screen, click Uninstall and repeat these steps as necessary.
7. When you see the message Your device is ready to use in the Windows taskbar, click the
message.
8. On the Driver Software Installation screen, make sure your product is listed as Ready to use. Then
click Close.
Starting a Scan Using the Product Control Panel
158