Unified Brands Power Soak SILVER SOAK Operator's Manual

OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
888-994-7636, fax 888-864-7636
unifiedbrands.net
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
NOTIFY CARRIER OF DAMAGE AT ONCE It is the responsibility of the
consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Unified
Brands suggests that if you are suspicious of damage to make a notation
on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
INTRODUCTION AND CONVENTIONS
PRODUCT INTRODUCTION
Thank you for purchasing a Silver Soak Pre-washing System. When used properly,
your system will provide years of dependable, efficient and trouble-free service. As a
Silver Soak owner, you will benefit in numerous ways:
• Your silverware washing operation will be more efficient.
• Your silverware will be cleaner and your customers will enjoy an enhanced
experience.
• Demands on your spray washer will be drastically reduced.
• The need for hand polishing will decrease or be eliminated, and employee morale
will increase.
• Chemical and water usage will decrease.
Every system is manufactured to last, with high-quality, heavy-duty, 14 gauge stainless
steel used in its construction. All electrical components are of the highest quality. The
system is easy to use, gentle on silverware, and very compact.
At Unified Brands, we take pride in manufacturing the Power Soak line and are
committed to standing behind our customers and products. Should you ever need
assistance, please contact us directly by dialing 888-994-7636 or fax: 601-371-9732.
This manual covers the following Silverware Pre-washer types:
MOBILE: These pre-washers are designed with legs equipped with casters to allow
them to move about the scullery. They may also be moved to bussing areas of banquet
halls or other locations where permanent installation is not practical. They are drained
into floor sinks, and they are filled with a tempered (110-115ºF) portable water supply.
Available at 115V only with built-in power cords.
STATIONARY: These stand alone pre-washers are not portable but do not require
permanent installation into an existing dish table. They are designed with legs but
do not have casters. The drain and faucet connections are typically hard plumbed per
local code. They are filled with a tempered (110-115ºF) portable water supply. The
electrical connection is typically hard wired per local code.
The information in this document is Confidential and shall not be disclosed to any third party without the express written consent of Unified Brands.
Information contained in this document is known to be current and accurate at the time of printing/creation. Unified Brands recommends referencing
our product line websites, unifiedbrands.net, for the most updated product information and specifications. © 2022 Unified Brands. All Rights Reserved.
This manual provides information for:
SILVER SOAK PRE-WASHING SYSTEM
DROP-IN: These pre-washers are mechanically installed into dish tables. See installation
manual for cutting hole to accept the drop-in unit into a dish table. The Drop-in pre-
washer uses a flange and clamp to lock itself into the dish table opening. The drain
and faucet connections are typically hard plumbed per local code. They are filled with a
tempered (110-115ºF) portable water supply. The electrical connection is typically hard
wired per local code.
WELD-IN: These pre-washers are designed to be integrally welded into new or existing
dish tables. See installation manual for cutting hole to accept the weld-in unit into a dish
table. The drain and faucet connections are typically hard plumbed per local code. They
are filled with a tempered (110-115ºF) portable water supply. The electrical connection
is typically hard wired per local code.
EXPLANATION OF WARNING MESSAGES
Read, understand and follow all DANGER, WARNING, and CAUTION messages located in
this guide and on the equipment.
Danger
Personal Injury and Property Damage hazard.
May result in serious injury or death.
May cause extensive equipment damage.
Warning
Property Damage Hazard.
May result in property or equipment damage.
Chemical Hazard
May result in serious injury or death. Instructions, labels and Material Safety
Data Sheets (MSDSs) should be supplied with all cleaning chemicals by the
chemical supplier.
Unified Brands is not a manufacturer, importer, or distributor of cleaning
chemicals. Unified Brands, Inc. will not make specific brand recommendations
for these chemicals.
PART NUMBER SSPWS, REV. A (05/21)