Cobra CIR2000A Owner's Manual page 65

3. Select [IP Source] and press SELECT/OK button to switch [Dynamic] to [Static].
4. Scroll up/down to [TCP/IP] and then press SELECT/OK button to start editing.
5. Press UP/DOWN button to change characters, then press LEFT/RIGHT button to
shift.
Press UP/DOWN (or number key) then LEFT/RIGHT to input IP.
6. After finishing, press REC button to confirm.
NOTE：When IP setting value (including IP, Subnet Mask, or Gateway) is illegal, IP setting
will change to default value.
IP Setting
IP Source Dynamic
Press SELECT/OK to switch [IP Source] to [Static]
IP Setting
IP Source
TCP/IP
DNS
Select [TCP/IP], then press SELECT/OK
TCP/IP
IP 192.169.001.100
Mask 255.255.255.000
GW 192.169.001.254
TCP/IP
The IP Setting Value is
illegal ! Setting is
Changed to Default !
65
Static
>
>
65