Setting The Wi-Fi Connectivity - Cobra CIR2000A Owner's Manual

12 .4.2 Setting the Wi-Fi Connec tivity

12.4.2 Setting the Wi-Fi Connectivity

1. Insert a Wi-Fi USB adapter into the USB connector. (The Wi-Fi USB adapter is
optional)
2. Press SETUP button, then scroll up/down to [Network ] and press SELECT/OK
button.
3. Select [Connect ] and switch [LAN] to [WLAN].
3. Select [Conn ect ] and switch [LAN] to [WLAN].
4. Press STOP/ESC button to quit Wizard.
5. Scroll up/down to [Wireless ] and then press SELECT/OK button to enter.
6. Scroll up/down to [Site Survey], [Conn ect Mode ], [SSID] or [Encryption ], then
6. Scroll up/down to [Site Survey], [Connect Mode], [SSID] or [Encryption], then
press SELECT/OK button to enter.
7. Press UP/DOWN and SELECT/OK button to set each necessary item.
Network Network
Connect
Connect
IP Setting
I P Sett ing
Use Proxy Use Proxy
Select [Connect] and switch [LAN] to [WLAN]. Select [Conn ect] and switch [LAN] to [WLAN].
Network
Network
Wizard
Wizard
IP Setting
IP Se tting
Wireless
Wireless
[Wireless ] item will appear on the screen.
62
62
LAN
LAN
>
>
No No
>
>
>
>
>
>