Page 1
Gas hob PNC6B.., PNH6B.., PNP6B.., PNP7B..[en] Instruction manual Gas hob...
Page 2
Pan supports Control knobs " Economy burner with an output of up to 1 kW Standard-output burner with an output of up to 1.75 kW High-output burner with an output of up to 3 kW Mini wok burner up to 3.3 kW &...
Important safety information cooking purposes, not as a heating system. (Important safety The warranty will only be valid if the appliance information is used for the purpose for which it was designed. Warning – Risk of deflagration! This appliance is intended for use up to a I m p o r t a n t s a f e t y i n f o r m a t i o n Accumulation of unburned gas in an enclosed maximum height of 2000 metres above sea...
Getting to know your appliance Warning – Risk of injury! *Getting to know your Cracks or fractures in the glass plate are ■ appliance dangerous. Shut immediately off all burners and any electrical heating element. Unplug the appliance from the mains or switch off Y ou can find your appliance and the burner powers in G e t t i n g t o k n o w y o u r a p p l i a n c e the circuit breaker in the fuse box.
Gas burners Accessories ÄGas burners The following accessories can be purchased from the Technical Assistance Service: S witching on manually G a s b u r n e r s Additional wok grid Press the control knob for the selected burner and Only suitable for use on wok turn it anticlockwise to the highest power setting.
Cooking pans An orange-coloured flame is normal. This is caused by Precautions for use the presence of dust in the atmosphere, spilt liquids, etc. The following advice is intended to help you save If the burner flames are accidentally blown out, switch energy and prevent pan damage: off the burner operating control knob and do not try to Use pans which are the...
Cleaning and maintenance Caution! 2Cleaning and maintenance Do not remove the control knobs when cleaning the ■ appliance. The appliance may be damaged if moisture finds its way inside. C leaning C l e a n i n g a n d m a i n t e n a n c e Do not use steam cleaners.
Customer service Fault Possible cause Solution The burner immediately The control knob was not held down for long enough. Once the burner is on, hold the control knob down a few switches off after releasing the seconds longer. control knob. The grooves on the burner are dirty.
Need help?
Do you have a question about the PNC6B Series and is the answer not in the manual?
Questions and answers