Waring Torq 2.0 TBB160 Instructions Manual page 11

MUST NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST
NOT EXCEED ONE-QUARTER CONTAINER FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth or sponge
dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on
motor base, and run on HI speed for one (1) minute. Empty
container. Dislodge any residual moisture from blade
assembly by placing empty container on motor base and
running on HI speed for two (2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing solution
for two (2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces of
motor base with soft cloths or sponges dampened with
washing solution, rinse water, and sanitizing solution.
Prevent liquid from running into motor base by wringing all
excess moisture from cloths or sponges before using them.
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION,
RINSE WATER OR SANITIZING SOLUTION.
2. Allow motor base to air-dry before using.
SERVICE
Refer to the list of Authorized Service Centers enclosed with your
®
Waring Commercial Blender for the name of the nearest Service
Center, or write to:
processing of biologically active material, we request that any
items returned for service be sterilized before being shipped.
Waring Factory Service Center
P.O. Box 3201
314 Ella T. Grasso Avenue
Torrington, CT 06790
(800) 492-7464
NOTE: If your application involves the
11