Rear Terminal - Canon LV-8320 User Manual

⑤
⑩
⑪
① LAN Connection Terminal
Connect the LAN cable (refer to the user's
manual of "Network Set-up and Operation").
② HDMI Terminal
Connect the HDMI signal (including sound
signal) from video equipment or from
computer to this terminal (pp.16, 17).
is registered trademarks of HDMI
Licensing, LLC.
③ COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB
scart 21-pin video output or component video
output to this terminal (pp.16,18).
④ COMPUTER IN 2 / MONITOR OUT
– Connect computer output to this terminal
(p.16).
– This terminal can be used to output the
incoming analog RGB and Component
signal from COMPUTER IN 1/
COMPONENT IN terminal to the other
monitor (pp.16,18).
⑤ AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this
jack (pp.16-18).
This terminal outputs sound from AUDIO IN
terminal (⑧, ⑩ or ⑪), or HDMI terminal (2)
(digital audio).
Never plug headphones and earphones into
this jack.
⑥ S-VIDEO IN
Connect the S-VIDEO output signal from
video equipment to this jack (p.17).
Rear Terminal
④
⑨ ⑧
Part Names and Functions
③ ②
⑥
⑦
⑦ CONTROL PORT
When controlling the projector with
RS-232C, connect the control equipment
to this connector with the serial control
cable.
⑧ AUDIO IN
Connect the audio output signal from
video equipment connected to ⑥ or ⑨ to
this jack. For a mono audio signal (a single
audio jack), connect it to the L (MONO)
jack (p.17).
⑨ VIDEO IN
Connect the composite video output signal
to this jack (p.17).
⑩ COMPUTER AUDIO IN 1
Connect the audio output (stereo) from a
computer or video equipment connected
to ② or ③ to this jack (pp.16, 18).
⑪ COMPUTER AUDIO IN 2 (MIC IN)
Connect the audio output (stereo) from a
computer or video equipment connected
to ④ to this jack. Or connect the MIC to
the this jack (pp.16, 18).
①
11