Using Contents Copy; Using Emergency Contents; Information Osd - NEC MultiSync P484 User Manual

4. RELOAD.
Updates microSD memory card data.
5. THUMB/LIST.
The fi les can be displayed using either icons or thumbnails.
Displays description of the fi le or folder if you select thumb name or fi le name.
6. SORT.
Select sort type. The folders saved in the microSD are sorted based on what you selected in sort type.
7. Connect to the other monitor's SD-CARD VIEWER then open them.
By selecting SEARCH, displays the other monitor's IP ADDRESS which is on the same network as the monitor is.
Select Open new tab by right click or select Open new window by left click.

Using CONTENTS COPY

You can copy the all data saved in a USB storage device or saved in a shared folder which is set in the connected computer or
a server to a microSD memory card.
For copying shared folder data, please set SHARED FOLDER SETTINGS (See page 25) fi rst.
1. Select CONTENTS COPY at the top screen of the Media Player.
2. Select a USB storage device or a folder.
3. Select OK to start copying. All data saved in the folder or device is copied to the microSD memory card then the original data
saved in the microSD memory card is deleted.
NOTE: "Out of disk space" is displayed if microSD memory card storage capacity is not enough to copy selected folders.
When contents copy has occurred, previous data that was saved in the microSD memory card is deleted.
Only devices connected to the monitor are shown.
When the monitor is copying a folder, the LED indicator blinks in red.
When the monitor is in this condition, do not eject a microSD memory card from the monitor or do not turn off the
monitor's main power. It may occur data damage to the memory saved in the microSD memory card.
If you press STANDBY button on the remote control or POWER button on the monitor while the LED indicator is
blinking in red, the monitor goes to standby after completed folder copy.

Using Emergency contents

In case of emergency, by sending a command to the monitor from a computer which is connected to the monitor, the emergency
contents folder will be played. Please create an EMERGENCY CONTENTS folder as a route folder in a microSD memory card
which is connected to the monitor.
Instructions for the EMERGENCY CONTENTS can be found on the CD included with the monitor. The fi le is called
"External_control.pdf".

Information OSD

The Information OSD provides information such as: Input Source, Picture Size, etc.
Press the DISPLAY button on the remote to bring up the Information OSD.
³
Input name
·
Audio input name
»
Picture aspect
¿
Input Signal Information
´
Multi picture information
²
Communication Info
H
English-27