NEC MultiSync P484 User Manual page 59

Supporting HDMI CEC command
OSD menu HDMI CEC command name
CEC One Touch Play
(Consumer
Electronics
Control)
Remote Control Pass
Through
Power Status
System Information
AUTO System Standby
TURN OFF
AUDIO System Audio Control
RECEIVER
SEARCH Device OSD Name Transfer
DEVICE
Routing Control
This CEC function is supporting Feature Abort. We recommend that connecting this monitor to a device supporting HDMI CEC.
Please refer to Connections (See page 16) for HDMI CEC devices connection.
Explanation
If HDMI CEC supporting devices are
turned on, the monitor which is connected
the devices by HDMI cable is also turned
on automatically. After that the input
switches to HDMI from an input which
you selected.
If the monitor is turned on when HDMI
CEC devices are turned on, it changes
the input from original one to HDMI.
The monitor's wireless remote control
button operation is functioning to HDMI
CEC supporting devices.
For example, if turn on the monitor by
wireless remote control and press play
button, HDMI CEC supporting devices
will also be turned on and play.
Connected HDMI CEC supporting
devices obtains the monitor's power
status such as the monitor is in standby
mode or on.
This function obtains the information of a
connected HDMI CEC supporting device
(CEC version, Physical Address). In
addition, this function copes with "Change
Language function".
If the language using at the monitor is
changed, the language at connected
HDMI CEC supporting device is changed
to the same language which is selected
at the monitor.
For the "Change Language function", it is
necessary that the connected HDMI CEC
supporting device to be able to cope with
multi-language.
If the monitor is set to standby by
wireless remote control supplied with the
monitor, HDMI CEC supporting devices
also go into standby at the same time.
If the monitor is turned standby while
a HDMI CEC supporting device is
recording, the device is kept on. Please
refer to the user's manual supplied with
the HDMI CEC supporting device for
further information.
The function sends digital audio signal
through HDMI cable. Please set a HDMI
CEC audio amplifi er between the monitor
and a HDMI CEC supporting devices with
HDMI cable.
The Volume button on the wireless
remote control supplied with the
monitor is also controlling volume
of the connected HDMI CEC audio
amplifi er.
While this function is active, internal
speaker or external speaker connected to
the monitor is set to MUTE automatically.
This function obtains the connected
HDMI CEC supporting device's name.
By selecting device name, HDMI CEC
supporting device input switches to the
input you selected. After selecting the
device, wireless remote control operation
is functioning to the selected device.
English-57
Setting
To set CEC menus please follow the steps
below.
By using buttons select CONTROL >
CEC then press SET/POINT ZOOM button
on the CEC.
By using + - buttons select ON then press
SET/POINT ZOOM button on the ON.
By using buttons select AUTO TURN
OFF then press SET/POINT ZOOM.
By using + - buttons select YES then press
SET/POINT ZOOM button on the YES.
By using buttons select AUDIO
RECIEVER then press SET/POINT
ZOOM.
By using + - buttons select YES then press
SET/POINT ZOOM button on the YES.
By using buttons select SEARCH
DEVICE then press SET/POINT ZOOM.
By using + - buttons select YES then press
SET/POINT ZOOM button on the YES.