Specification; Operating Modes; Harmonics And Flicker Measurement System Test Supply; Operator Indicators - EMS HFG01 Operation Manual

4 S
PECIFICATION

4.1 Operating modes

(See Section 5. Output Performance for details of typical measurement results)
4.1.1 Current harmonics
Frequency range
Stability
4.1.2 Flicker disturbance
Flicker rate
Stability

4.2 Harmonics and flicker measurement system test supply

4.2.1 Test Supply ratings
Voltage
Current
Frequency
Power rating
Connector
Insulation rating

4.3 Operator indicators

(See Section 4. Operation for a full description of the control and indicator functions)
Operation indicators
4.3.1

4.4 Power requirements

HFG01
Input connector
Voltage input
Power consumption
Power supply unit
Input connector
©York EMC Services
HFG01 Operation Manual
5 Hz to 2.0 kHz
< 5% of the test limit in EN 61000-3-2 standard
1 Hz
8.3 Hz
< 5% of the reading
200 Vac to 253 Vac
3 A (peak)
50 Hz
500 W max
CEE 7/7 European style plug for connecting the HFG01
to the Test Supply under test.
3000 Vrms
Test enabled / running
System alarm
2.1 mm DC power jack (inner conductor +ve)
24 Vdc
24 W max
IEC plug
Page 9 of 21
(50 Hz Test Supply)
(50 Hz Test Supply only)
(50 Hz Test Supply only)
(230 Vac nominal input)
Doc. No. Y0321/DOC/038 Rev. 2