Troubleshooting; An Error Message Is Displayed On The Lcd; Troubleshooting Troubleshooting Troubleshooting Troubleshooting - Canon PIXMA iP6600D Series Direct Printing Manual

Troubleshooting

Troubleshooting
Troubleshooting Troubleshooting
Let's take a look at countermeasures against troubles which may occur during use of the printer.
Here, we will discuss errors indicated on the LCD, problems that might occur
during direct printing from the digital camera. If you cannot find the symptom
corresponding to a certain problem, refer to the User's Guide .
• "An Error Message is Displayed on the LCD" on page 59
• "POWER Lamp and Alarm Lamp Flash Alternately" on page 62
• "Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD" on
page 62
• "Printer Does Not Start/Ink Does Not Come Out/Printing is Blurred/Colors are
Wrong/White Streaks" on page 63
• "Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is
Scratched" on page 64
• "Paper Jams" on page 67
• "Cannot Print Properly from the Digital Camera" on page 70
• "Cannot Print Properly through Wireless Communication" on page 72

An Error Message is Displayed on the LCD

If Alarm Alarm lamp lights, and an error message is displayed on the LCD, take the corresponding
Alarm Alarm
countermeasure described below.
Message
There are no photos in memory
card.
Ink has run out. Replace the ink
tank and close the cover.
U041
• Photo data edited/processed on the computer should be printed from the
computer, not from the camera.
• There is no proper data in the memory card. See "Memory Cards Supported by
This Printer" on page 8.
The ink has run out (The lamp on the ink tank flashes).
Replace the ink tank, and close the cover.
If printing is in progress and you want to continue printing, press the OK
the ink tank installed. Then printing can continue under the ink out condition.
Replace the empty ink tank immediately after the printing. The printer may be
damaged if printing is continued under the ink out condition.
If multiple ink tank lamps are flashing red, check how fast they flash. Fast flashing
(at about one second interval) indicates the ink is empty. Slow flashing (at about
three seconds interval) indicates ink is low. For details on different flashing speeds,
see "Getting the Ink Level Information" on page 50.
Try This
OK button with OK OK
59