Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon PIXMA iP6600D Series Direct Printing Manual

Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can also be used as the memory card drive of the computer.
To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer, and the Memory Card Utility
must have been installed for Windows Me/Windows 98/Windows 98 Second
Edition. If the utility is not installed, install it following the installation
procedure explained in the Easy Setup Instructions .
When Read/write mode
After you are finished with using the card slot as a memory card drive for your
computer, remove the memory card, then be sure to select Read-only mode
again.
1
Ensure that the printer and the computer are turned on.
2
Display the Read/write attribute
(1) Ensure that no memory card is in card slot.
If a memory card is in the card slot, remove it.
(2) Press the Menu
(3) Use the
button.
(4) Use the
(5) Use the
(6) Use the
button.
3
Specify the Read/write attribute.
(1) Use the
•When selecting Read/write mode
the computer. Photo data can be written into the memory card.
•When selecting Read-only mode
select this mode when printing photos.
(2) Press the OK
You can save only the selected photos when you have selected
photos using the search function. For the information about the
search function, see "Searching for Photos with the Shooting
Date" on page 23.
Read/write mode Read/write mode is selected, you cannot print photo in the memory card. Read/write mode
Read/write attribute Read/write attribute screen. Read/write attribute
Menu button.
Menu Menu
buttons to select Maintenance/settings
buttons to select Device settings
buttons to select Other settings
buttons to select Read/write attribute
buttons to select a mode.
Read/write mode, the card slot is used as the memory card drive of
Read/write mode Read/write mode
Read-only mode Read-only mode Read-only mode, the card slot is used only for reading. Be sure to
OK button.
OK OK
If you use the card slot of the printer as the memory card drive of the
computer, follow the instructions for removal of the memory card
from the computer before removing it.
Windows: Right-click the removable disk icon and click Eject
If Eject Eject is not displayed on the screen, ensure that the Eject Eject
indicator lamp is not flashing and remove the memory
card.
Macintosh: Be sure to drag the
Maintenance/settings and then press the OK
Maintenance/settings Maintenance/settings
Device settings and then press the OK
Device settings Device settings
Other settings and then press the OK Other settings Other settings
Read/write attribute and then press the OK Read/write attribute Read/write attribute
icon into the Trash
Read-only mode Read-only mode Read-only mode
OK
OK OK
OK button.
OK OK
OK button. OK OK
OK OK OK
Eject.
Eject Eject
Trash. Trash Trash
49