Performing Infrared Communication - Canon PIXMA iP6600D Series Direct Printing Manual

Performing Infrared Communication

You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1
Turn on the printer.
2
Load the paper.
See "Loading Paper" on page 11.
3
Press the Feed Switch
the paper.
4
Set the print setting.
See "Setting the Page Size, Media Type, and Layout When Printing From a Mobile
Phone" on page 42.
5
Start Infrared Communication.
(1) Oppose the infrared port of the mobile phone to that of the printer at a distance
of less than 20 cm.
Effective angle (in both
vertical and horizontal
direction): About 10°.
(2) Select the photo to print and send the data to the printer using the infrared
communication function of the mobile phone.
The POWER POWER lamp on the printer flashes when the printer receives the data POWER POWER
property.
Printing will start after receiving all data.
44
Feed Switch button to select the paper source in which you loaded Feed Switch Feed Switch
The effective angle of the infrared port of the printer is about 10° from the
central axis in both vertical and horizontal directions.
The allowable distance of communication with the printer depends on the
mobile phone you use. For this distance, refer to your mobile phone
manual.
Infrared port of printer
Less than 20 cm
(Do not block with any obstacle.)
Infrared port of mobile phone