Page 2
In many installations, subwoofer position is a choice between power or placement. With only 24 cm (9.5“) of height, the B14i allows system designers to place this custom designed sub in a space the height of a typical 8“ subwoofer, significantly increasing placement options without compromising output.
Page 3
This symbol in combination with the signal word “Tip” identifies additional information or notes that will simplify working with TW AUDiO products on the basis of practical experience. Notes on the products Before using the device, carefully read the operating manual and keep it with the B14i loudspe- Read manual aker.
1. Safety | Intended use Please adhere to the following safety instructions to avoid risks when operating loudspeakers. The B14i loudspeaker was developed for use in professional sound systems. The loudspea- ker may only be used by trained and qualified personnel.
Page 6
Operation manual B14i Ensure that the loudspeaker is not exposed to permanent thermal overloads. Thermal over- loads may cause a fire and result in serious personal injury and property damage. WARNING Note that TWAMBO does not provide a warranty for damage that can be attributed to this type of overload and therefore cannot be held liable for any secondary damage.
Operation manual B14i 3. Technical specifications Data sheet Drivers 1x 14“ LF Frequency response 39 - 120 Hz Power handling (program/Peak) 1400 / 2800 W Impedance 8 Ω Max. SPL / 1m 126 dB Dimensions (h x w x d)
NOTE 4. For the B14i loudspeaker M6 and M10 threaded inserts, various TW AUDiO accessories can be mounted. For each product refer to the instructions. 5. Note that the load capacity is limited to a single speaker.
Before connecting the loudspeaker to the amplifier, ensure that the right preset has been loaded. NOTE Using a wrong, out dated or a preset not provided by TW AUDiO can lead to destruction of the speaker. Make sure that the amplifier’s specifications meet the requirements. Using an amplifier that doesn’t meet the specifications can destroy the loudspeaker.
(1/2) are correct. Incorrect connection can lead to a significant change in the loudspeaker’s sound characteristics and may damage the driver. The pin connections of the B14i loudspeaker can be found in section 3.2 (“Connection dia- gram”) on page 8.
Operation manual B14i 5. Transport and Storage Due to the B14i loudspeaker weighing over 20 kg [44.09 lbs.], two persons are required to handle and transport the unit. Ensure that the front grill of the loudspeaker is not damaged during transport and storage.
Operation manual B14i 7. Disposal It is prohibited to dispose of used electrical equipment with household refuse. All TWAMBO GmbH products are so-called B2B-products. This means that they are sold by a commercial business to a commercial business. TWAMBO products that bear the trash can symbol shown here may only be disposed of by TWAMBO.
Need help?
Do you have a question about the B14i and is the answer not in the manual?
Questions and answers