Configuration - TOOLCRAFT Digimicro LAB 3.0 Operating Instructions Manual

12 Configuration

In the configuration menu you can configure the microscope.
Menu navigation buttons
1
Button
▲▼
OK
Settings
2
Menu entry
Photo Resolution
Video Resolution
Exposure
Date/Time
Date Stamp
TV Out
Loop Recording
Auto Power Off
Language
Format
Default settings
Function
Enter and exit the menu
Scrolling and selecting entries
Confirm selections
Function
Set the photo resolution.
Set the video resolution.
Set the exposure.
Set date, time, and date format.
Enable and disable time stamp on photos.
Select TV out signal.
Set length of video clips.
Set auto-off time.
Select language.
Format the microSD card.
Reset all settings to the factory default settings.
39