Capturing Videos; Viewing Images And Videos - TOOLCRAFT Digimicro LAB 3.0 Operating Instructions Manual

11.6 Capturing videos

P
reconditions
A formatted microSD card is installed.
D
The remote control is connected.
D
1. Bring the object into focus.
2. On the remote control, continue pressing the mode button
shows on the display.
3. On the remote control, press the capture button
The symbol
Æ
The video is saved to the microSD card.
Æ
4. Press the capture button
Note: If the camera is connected to an HDMI monitor, you cannot capture
video.

11.7 Viewing images and videos

1. On the remote control, press the playback button
mode.
2. Press the menu buttons ▲ and ▼to navigate through images and videos.
Playing back video
1
Follow the playback instructions on the display to playback video.
Note: If the camera is connected to an external monitor, played back images
and videos will show on the monitor.
flashes on the display.
to stop recording.
until the symbol
to start recording a video.
to activate the viewing
37