Formatting The Microsd Card; Setting The Date And Time; Connecting The Remote Control - TOOLCRAFT Digimicro LAB 3.0 Operating Instructions Manual

Microscope camera
Table of Contents

Advertisement

Available languages

Available languages

9.4 Formatting the microSD card

To record images and video, the microSD card must be formatted.
P
reconditions
The microSD card is installed in the microscope.
D
1. (If turned off) Press the power button
2. Press the menu button
3. With the menu buttons ▲ and ▼navigate to Format.
4. Press the menu button OK two times (2x) and follow the on-screen instructions
to format the microSD card.
5. Press the menu button

9.5 Setting the date and time

1. (If turned off) Press the power button
2. Press the menu button
3. With the menu buttons ▲ and ▼navigate to Date/Time.
4. Press the menu button OK to open the Date/Time entry.
5. Set the date, time and date format. Set values with the menu buttons ▲ and ▼.
Confirm entries with the button OK.
6. Press the menu button

9.6 Connecting the remote control

Connect the remote control to capture images and video and control the digital
zoom.
1. Connect the jack on the remote control cable to the remote control port KEY.
to turn the microscope on.
to open the menu.
to leave the menu.
to turn the microscope on.
to open the menu.
to exit the menu.
33

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Digimicro LAB 3.0 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

2373534

Table of Contents