Changing The Thread Color Display - Brother Innov-Is NV2600 Operation Manual

g Remove the thread for the first color from the
machine. Thread the machine with the next color.
h Repeat the same steps for embroidering the remaining
colors.
→ When the last color is sewn, the message informing
that the embroidering is finished will appear on the
display. Press , and the display will return to the
initial screen.
Memo
• For the automatic thread cutting setting, refer to
"Using the automatic thread cutting function (END
COLOR TRIM)" in the "Embroidering" section.
i Cut the excess thread jumps within the color.

Changing the thread color display

You can display the name of the thread colors or embroidery
thread number.
Memo
• Colors on the screen may vary slightly from actual
spool colors.
a Press .
Use or on operation panel to display the thread
b
color selections.
c Use or to select the name of the thread colors
or the embroidery thread number.
Thread color name
Thread number
d When the thread number "#123" is displayed, use
or to select from six embroidery thread brands
pictured below.
Embroidery (polyester thread)
Country (cotton thread)*
Madeira Poly (polyester thread)
Madeira Rayon
Sulky
Robison-Anton (polyester
thread)
* Depending on the country or area, cotton-like polyester
thread is sold.
e Press .
Embroidering
Basic operations B-65
B